Quick take: Vintage Canon FD lenses on a Fujifilm body give you cheap, characterful glass and a film-like look without paying for film and development. A speed booster turns my FD 20-35mm F3.5L into roughly a 21-37mm equivalent at about F2.5 on the X-T3. You give up autofocus and weather sealing, but for walk-around photos it's a blast.
Why Vintage Glass Is Worth a Look
Vintage lenses won't beat modern glass on sharpness or autofocus, especially ones with no autofocus at all. But they're cheap, and their character was designed in, not the side effect of cut corners that some new lenses market as a feature.
Adapting old lenses is getting more popular as new gear gets more expensive and used prices stay high. Fujifilm, I'm looking at you. Film prices have climbed too, but so many lenses were made back then that they're still reasonable.
This video came from a subscriber, Lena, who messaged me after my X-T200 video. She shoots a Canon FD film camera, was tired of paying for film and development, and wanted to know about putting her FD lenses on the X-T200. I suggested an X-T2 or X-T3 for better ergonomics, then remembered that's exactly what I did for years.
Film taught me something important, by the way. At around $50 for 36 frames, you slow down and compose every shot so almost every frame is a keeper. Shooting sports for years had trained me out of that.
Adapters vs. Speed Boosters, Simply
There are three ways to mount lenses from one system on another:
Lens mount adapter: keeps the lens at the same distance from the sensor as it was designed for. Same-brand adapters like Canon EF to RF or Nikon FTZ keep most functionality. Cross-brand autofocus adapters work well enough for photos and are hit or miss for continuous AF. There's a whole community adapting Nikon F super-telephotos to Fuji, and they love it.
Speed booster (focal reducer): shrinks the image by about 0.71x. That gives you a wider field of view and an extra stop of light. It doesn't make APS-C full frame, but you end up around a 1.1x crop instead of 1.5x.
Focal expander: the opposite of a speed booster, usually for putting full-frame lenses on medium format.
The math on my setup
I used a Canon FD 20-35mm F3.5L on my Fujifilm X-T3 with a Metabones speed booster.
Multiply by 0.71: the lens becomes a 14.2-24.85mm F2.5.
Apply the X-T3's 1.5x crop: you get about 21.3-37.3mm equivalent, with depth of field like an F3.75 lens.
That's very close to the lens's original 20-35mm F3.5 on full frame. The speed booster changes the lens before it hits your camera, and then the usual crop factor applies.
Shooting With It
I walked around a local park and Paterson, New Jersey with the setup. Wide open or stopped down, you can see it isn't clinically sharp, and if you punch in there's some fringing. But look at the photos as photos and you get that nostalgic, timeless rendering we associate with film. A lot of that comes from the coatings and manufacturing of older lenses, not just the film stock.
Everything was shot on the Provia film simulation, with only small exposure tweaks and a blue boost on the edited ones. That's a nice perk of putting FD glass on a Fuji: you can use any film simulation or build your own.
Focus peaking is essential. Half-press the shutter to turn it off when you want to fine-tune before the shot.
Expect some color shift. Canon glass leans magenta and Fuji leans green, and in unedited shots the magenta shows, especially in whites. The extra glass in the speed booster adds a little purple fringing too. Both are easy to fix in post.
It changes how you see. Bright ice cream trucks, tall grass and Main Street in Paterson, better known as Palestine Way, all looked like memories through this lens. I wouldn't have shot them the same way with my normal Fuji lenses.
For a walk-around lens that cost about the same as a few cups of coffee, the background separation and zoom range are impressive.
The Experience
I've always rolled my eyes when people call Fuji cameras magical. It's a magnesium body with electronics inside. But the shooting experience is real, and it's why I still keep Fuji gear for personal work alongside my commercial kit. Pairing it with old lenses is the first thing in years that has really improved walk-around shooting for me. You get the shutter speed dial plus an ISO dial, and no pushing or pulling in development.
The Drawbacks
No weather sealing. I don't know of a weather-sealed speed booster, and as an outdoorsy guy who always gets caught in the rain, that matters. My X-T3 has handled everything the Northeast throws at it since 2018. Tip: if your dials get sticky, clean them with dental floss.
No autofocus. And some lenses are soft wide open. That's fine for video, but manually focusing a Canon FD 85mm F1.2 wide open on a close portrait through a speed booster is a precision sport. That's roughly F0.85.
Should You Do It?
For most people, I'd recommend this over shooting film. You can even keep an old Canon A-1 or F-1 alongside it and share lenses to keep costs down. I also like using old equipment instead of feeding the upgrade cycle and the electronics waste, and the worst practices in how precious metals for our gear get sourced.
I have an EF-to-Fuji speed booster and some EF glass left too. Let me know in the comments if you want a video on that setup, or on the FD 85mm F1.2 for portraits.
Keep Reading
Gear and Affiliate Links
Gear in this video
My kit
Favorite portrait lenses
Audio
As an Amazon Associate I earn from qualifying purchases. Buying through these links costs you nothing extra and helps support the channel.

