13mm Wide Angle Setup For Your Z-V1 II

Quick take: The Sony ZV-1 II's 18mm wide end still isn't wide enough for a cramped desk. By mounting an old Ulanzi wide-angle adapter on a teleprompter bracket in front of the lens, I got roughly a 13mm full-frame view, wider than my Fuji 10-24mm. It's a Frankenstein setup, but for talking-head videos at your desk it's a great trick.

The Problem: Desks Need Ultrawide

If you record talking-head videos at a desk like I do, you really need something around 14-15mm full-frame equivalent. When Sony announced the ZV-1 II, I hoped it would be a 16-35mm equivalent. It ended up 18-50mm. Wider than the original ZV-1, but not wide enough for me to keep part of my desk in frame and bring things up to the camera. The 18mm end cut that off.

So I combined a few old parts into something that works.

The Parts

  • Sony ZV-1 II

  • Ulanzi wide-angle lens adapter, made for the original ZV-1. It was marketed as turning the 24mm lens into 18mm, though in practice the original ZV-1 was closer to 27mm.

  • A teleprompter bracket that mounts a point-and-shoot like a ZV-1, G7X or RX100 behind a 52mm thread.

Why the Bracket Matters

The original way to mount accessories on these cameras was a little plastic adapter glued or double-sided-taped to the end of the lens. Hanging weight off the end of a plastic, extending lens is a bad idea, and a teleprompter on there can be close to a pound.

The teleprompter bracket is the clever part. The camera sits in the bracket, the lens extends into it, and the weight hangs on the bracket instead of the lens. It has a 52mm front thread, so I screwed the Ulanzi wide-angle adapter onto that.

Then I realized I could slide the camera much further forward into the bracket, until the lens sits right behind the adapter. No crop, and suddenly it's actually wide. This might become my main talking-head camera.

Important: set the distance carefully. If the extending lens presses into the adapter, you can damage the lens motors.

How Wide Is It?

The adapter acts as about a 0.75x focal reducer, so the ZV-1 II's 18mm becomes roughly 13-13.5mm equivalent. That's wider than my Fujifilm 10-24mm, which is about 15mm equivalent, and frames me the same way my X-H2S does with that lens in open gate. At arm's length I have plenty of room, and it still focuses well when I bring things close.

You'll see some curvature at the edges from the adapter, but a lens correction in post fixes most of it.

Why Not Just Use a Phone?

Phones have ultrawide lenses, but unless you have a lot of light, they don't look great, and dark backgrounds get noisy fast. Most of us have desks against a wall without room for a big lighting setup. Given the choice, I prefer a dedicated camera:

  • No notification interruptions

  • No app crashes mid-recording, which does happen on long takes

  • Its 8-bit video looks better and takes up less storage, so you can keep everything

Mounting Notes

The bracket has standard quarter-inch threads on the bottom. If you use the SmallRig cage on the ZV-1 II, it won't fit this setup because of how the bracket lines up. The adjustment positions also differ between cameras, so if you have a G7X or RX100 with a 24-27mm wide end, you'll set it up differently.

It's a nerdy, Frankenstein setup, but if you've got a ZV-1 II and want a much wider view on your desk, it works surprisingly well.

Keep Reading

Gear in This Video

Gear in this video

My YouTube setup

As an Amazon Associate I earn from qualifying purchases. Buying through these links costs you nothing extra and helps support the channel.

Previous
Previous

Fujifilm X-T5 and 50mm F1 Natural Light Photoshoot

Next
Next

Upgrade Your Phone Videos: Five Essentials For Pro Results